HP is the brand known for high-tech technological products like laptops, computers, printers, and scanners. It is important that the HP Computer error codes are handled expertly with proper troubleshooting for solutions. Errors & mishaps are common in electronic devices and it occurs with every brand in existence. Make sure you are aware of the troubleshooting before making an attempt. Know the best troubleshooting steps from HP customer support at a minimum effort.
The HP computer error code 303 is one of the common errors and it is a result of bad sectors, technical issues with the hard-drive, boot-up issues, and hard-disk virus problems. The issues just mentioned are really fatal consuming a lot of time. The situation becomes really hard for the HP users to cope up with the situation easily. Thus, contacting the support experts over the HP Computer Support Phone Number is idle to fix various issues.
What is the cause of the error?
The error 303 is a system diagnostics error that is generally found after an accident with the HP computer or laptop, like being heavily hit by something. The computer will not boot successfully and will be redirected to the System Diagnostics. Run the Primary Hard Disk Self Test and see if the error is eliminated or not. The error indicates that the hard drive has failed that it is important to replace the hard drive. Contact HP computer tech support to know in details about the error.
Even simple troubleshooting of the error code 303 is handy to eliminate it. To troubleshoot, it is important to remove all the relative issues with bad sectors on the hard drive. Then properly check the glitches and bad spots inside the driver. After that, the user chooses to purchase a new hard drive. Press the ‘F8’ key to put the system in the Safe Mode and remove all the consulting issues with viruses & Trojan horses.
It is important to back up the important data on the hard drive before it gets worse with the HP recovery disc. Buy an HDD to replace the hard drive and a free back up software can also be used to back up the hard drive. HP computer support deals the system issues expertly.
First, it is important to create a bootable media and follow the steps to backup broken hard drive –
- Connect the bootable media created to the broken laptop and start the device.
- Press ‘F10’ to select the bootable media as the first boot device.
- Store the backup connecting as an external hard drive while the laptop reboots to the backup screen.
- Under the Backup tab click on ‘Disk Backup’.
- Choose the laptop hard drive clicking on ‘Step 1’ and select the external hard drive as the backup destination disk clicking on ‘Step 2’.
- Start the backup clicking on ‘Start Backup’.
- As the shutdown is done, shut down the computer and replace the failed drive with a new one.
- Now use the bootable media to boot the computer and start to restore the backup to the new disk.
Quick Steps to Troubleshoot HP Smart Test Failed Error Code 303
First Solution – Remove issues with bad sectors in hard drives
Issues might arise if the hard drive sectors are bad where smart-drive program dwells. Thus, properly check the hard drive to view the bad spots or any potential damage on the platter inside the hard drive. It is because the hardware is completely defective and a part of the platter of the disk is totally damaged. If the disk is totally dead then it is important to replace the disk immediately.
Second Solution – Purchase a new hard drive
Press the F8 button to boot the computer in the safe mode by getting a new drive. Copy all the files to a new drive. Buy a replacement hard drive and load the system disk in the CD Rom drive if it is difficult for the user to boot the computer.
Dial the HP laptop tech support number to know in details about the error and its solution. The solutions prescribed over the helpline number will be accurate and effective without a doubt. The tech experts analyze the problem remotely and then suggest a suitable solution.
Comments are closed.