After a long period of considering different options, you have made up your mind that you will replace your Regina windows. However, making a decision on whether to replace the windows and embarking on the real project are two different things. Replacing windows is not just going to the local window store and requesting for the replacement windows; you need to understand how to take measurements for your windows.
This is what this article will take through. We want you to understand various steps taken when measuring vinyl replacement Regina windows. However, you will still need the help of a professional window installer to guide you, especially on the right glass to use. There is triple, double and single pane and there is one which will appear better on your home. See weblink for more info.
- Window Measuring Tools.
When measuring Regina windows, you will need some tools. Some of the tools you require include:
- Measuring tape.
- Notepad.
- Pencil.
- Level.
Step 1: Collect Tools and Conduct Your Research.
If you want to measure full frame windows, you should understand what you need. You may need to visit your local window store, watch tutorials online to make sure that you are ready for the process. Otherwise, it is not recommended to take measurements for Regina windows and doors if you don’t have the necessary skills and experience. It is better left to the professionals.
However, if you have gathered the necessary tools and have done your research, you can proceed to the next step.
Step 2: Measure the Height of Your Window.
You should start by taking measurements for the height of your replacement Regina windows. Measure from the surface of the head to the window sill. Make sure you locate the right point for both the starting and end point. If the window has warped, use your level to locate the two points. Repeat that measurement for several times and note the smallest measurement.
Step 3: Measure the Width.
It is usually challenging to measure the width of the window due to the difficulty in finding the best place to measure. There are many debates about this, but to take right measurements for your Regina windows, you should raise your window sash. Now take measurements between the jams on both sides of the window frame. Just as height, repeat this several times and note the smallest length.
Step 4: Measure the Depth.
Measuring the depth can be challenging if you have not done it before. However, it is important to get accurate measurements since the depth determines whether the window will fit snugly in the frame.
To do so, take measurements for the whole dimension of the opening of the window to make sure you are getting the correct number of depths. Measure both between the inside and outside stops to get correct depth measurements. In most cases, the measurement is three and a quarter. Cross check your measurements since any little mistake can cost you a lot.
At this point, now you can draw the diagram with the measurements you have taken.