Linksys is one of the most popular electronic devices in the world which provides users with very fast internet service along with great security. If you want to access the internet through Linksys Velop you need to make a purchase of Linksys Velop package.
This is available as a single unit or a package of free. Linksys Velop is an ideal device for accessing the internet in large buildings without changing networks.
One thing that should be kept in mind is that you cannot connect more than three notes in one Velop mesh. In case if you want to connect more nodes, you will have to create another network.
The other things that are required are Ethernet port in the router or modem. You will also require the Linksys app which is available on Apple store or Google play store for free. We have provided you with the Linksys Velop Setup Guide.
Linksys Velop Setup Steps
The process of Linksys Velop setup starts with plugging in one of the Velop nodes. Then you need to turn on the node for which connect the power and network cables. This will display a blue colour.
Then the node will boost, on this you will have to install the Linksys app on the mobile device. Once you finish installing the app, you must open it and follow the below-mentioned steps:
- Tab on the Launch Setup button after which the app searches for the first node.
- After this, you will notice that the light on the node will turn purple which signifies that fact that the app has located the device.
- Then tap on Next. Then make an account to connect to the network.
- Then another screen will appear. This will ask you to set a name for your wireless network. Then you will have to create a password. It is advisable to create a strong password which is composed of a combination of numbers, letters and special characters.
- On the basis of the node’s location give a name to the node. In case if no default options fit, tap on Name and give another name to it. Make sure you give a unique name to it.
Now, the first node is now set up. Then you can tap on the Next option which is given on the screen. Then add another node that is there and finish the process of Linksys Velop setup guide.
How to Add another Velop Node?
If you want to add another node then you need to plug into power. After this tap on Another Node option which is there on the app. You will then find that there are some instructions that are displayed on the screen which you can follow.
This time Linksys Velop will perform all the required steps linksys extender setup Guide. The only job you need to take care of is to let the app know when the node displays purple. When it is purple, give a name to the node.
The main Velop node will transfer the configuration to the second and the third nodes. This process can consume up to 15 minutes. By the end of this time, you will have a 3-nide mesh network set up properly and ready to run.
